Spectrophotometer Visible Single Beam 10 nm
Advanced spectrophotometers are
combining a high level of performance with an simple and intuitive
manipulation. Compacts and light, these new spectrophotometers are ideal for
standard applications in education or in laboratory. A choice among 4 PRIM
units
• PRIM Light : Basic internal software including standard
spectrophotometric applications in absorbance, transmittance andsingle-standard
concentration.
• PRIM Advanced : Advanced applications for absorbance,
transmittance, multi-standards concentration, kinetics, multi-wavelengths and
spectrum scanning.
• For low concentration samples, PRIM Light and PRIM
Advanced are also available with 50 mm long cell holder.
• Internal applications : All applications, basic or
standard, are included and immediatly available on each spectrophotometer.
• 50 methods memory : All PRIM spectrophotometers can
store up to 50 methods in their memory. Stored application can be recalled any
time without reprogramming the method parameters. Before running the methode,
it is possible to check the stored parameters by pressing only one button from
the navigator key.
• Giant display : 2 lines of 16 digits, back-lit and
highly contrasted for best readability. Real-time and permanent display of
wavelength and absorbance in any measurement mode.
• 1 button = 1 function : Keyboard is clearly and simply
organized and every button corresponds to one specific function. Operation is
simpler, faster and tampering is avoided.
• Safety - Low power voltage : Mandatory in education for
pupil protection, and increasingly recomended on every lab where a risk is
existing due to water surroundings Powered by low voltage, any electric chock
is avoided.
• Internal calibration filter : In order to certify
accurate and repeatable results, the spectrophotometer calibrates itself
automaticaly on each start-up granted to its internal didymium filter ; a
complete report is automaticaly printed on the external printer if connected.
• Pre-adjusted halogen lamp : Located at the rear side of
the instrument, the lamp is pre-adjusted, it can be replaced quickly and easily
without any tool.
• Compact : Light 2,5 kg and compact with only A4 size,
PRIM can be handled easily.
A WIDE CHOICE OF
MEASURING MODES
• Absorbance / % Transmittance : Automatic wavelength
selection from 330 to 900 nm, per steps of 1 nm, with the Absorbance value and
the % of Transmittance monitored at real time.
• Concentration calculation : Concentration measurement
of unknown samples. Spectrophotometer calibration using factor or standards
(till 8) of known concentration.
• Kinetics : Analysis of Absorbance variation as a
function of the time. Program to include lag time, reaction time. Automatic
calculation of Absorbance variation during each segment of time or the total
time programmed.
• Spectrum scan* : A curve of Absorbance values as a
function of the wavelength, with the detection of Absorbance maxima and minima.
User-definable scan mode using the entire or partial visible range: 330 to 900
nm, per 1nm steps, with automatic recording of the base line.
• Multi-wavelengths mode : Measure of ratio and
difference of Absorbances at 2 wavelengths. Simultaneous display of calculation
results as well as individual Absorbance values at each wavelength * On
optional external printer
PRIM,A
SPECTROPHOTOMETER SUITABLE FOR ALL KINDS OF APPLICATIONS :-
• Education : Designed for various vocational educations,
from senior high school to university level. Resident measuring modes made it
easy to teach the Beer-Lambert law : concentration, kinetics, colorimetry or
spectrum measurement.
• Laboratory : Thanks to its wide choice of analytical
modes, PRIM spectrophotometers can be used for most routine spectrophotometric
laboratory applications.
• Industry : Its small size and ruggedness makes PRIM an
ideal spectrophotometer for industrial surroundings. Employed for Quality
Control, it can easily be placed at the delivery point as well as at all stages
of the manufacturing chain.
• Environment : Delivered standard with Absorbance and
Concentration measuring modes, the PRIM cell-holder can be replaced with the
optional 16 mm-tube holder to run classical COD tests. For weak Absorbance
samples, PRIM 50 mm, having a standard 50 mm cell-holder, offers enhanced sensitivity.
• Clinical Biology : PRIM 500, a special version equipped with auto-aspiration system, micro
flow-cell, thermocontrolled cell-holder (37°C) is suitable for biochemical
assays. (Separate brochure available upon request.)
TECHNICAL
SPECIFICATIONS
Spectral range : 330-900 nm
Bandwidth : 10 nm
Accuracy : +/- 1.5 %
Repeatability : +/- 1 nm
Photometric range : -0.3 Abs 0 -200 %T
Accuracy : +/- 2 %
Drift : < 0.03 A/h @ 500 nm
Stray light : 0.5 %T @ 340 & 400 nm
Display : Alphanumeric LCD back-lit 2 lines
height 8 mm 16 characters
Zero : Automatic
Light sources : Halogen
Detector : Silicon diode
Interface Serial : RS232C
Cell holder : 1 cuvette 10 mmv
Power : 115/230V - 50/60Hz
H x w x d : 180 x 280 x 220 mm
Weight : 2.5 kg
Visible spectrophotometer 10 mm cell holder. 3 YEARS WARRANTY. Delivered standard with a box of 100 plastic cuvettes box (ref 0G6317), user manuel and performance certificate. We advise you on the following consumables : 1 x 80ZZ0034 + 1 x 0GG4Z0 + 1 x 0G6317